Synthesis and Characterization of Zinc Oxide Nanoparticle for the Adsorptive Remediation of Petrochemical Effluents

Abstract

The zinc oxide nanoparticle was synthesized via precipitation method. It was characterized using SEM-EDX, FTIR and TEM for morphology, elemental, functional groups and internal structure respectively. The physicochemical behaviour of a refinery effluent was assessed. The untreated raw refinery effluent from the point of discharge contained very high concentrations of pollutants for all the parameters, ranging between, pH (6.52- 6.82), Turbidity (10-12 NTU), conductivity (266-289μs/cm), COD (116-138 mg/l), BOD (14-18.5 mg/l), DO (7.5- 15.6 mg/l), TDS (436-486 mg/l), TSS (127-133 mg/l), Oil and grease (14.8-16.3 mg/l), sulphate (113-125 mg/l) and chloride (240-280 mg/l). The effluent was treated with ZnO nanoparticle and reduced the pollutants to the normal permissible limit set by WHO, FEPA and NESREA standard for portable water. The treated effluent sample showed values ranging between, pH (6.55-6.6), Turbidity (4.2-4.5 NTU), conductivity (245-246 μs/cm), COD (39-40 mg/l), BOD (10 mg/l), DO (5.6-10.4 mg/l), TDS (151-183 mg/l), TSS (24-28 mg/l), Oil and grease (7.3-9.5 mg/l), sulphate (100 mg/l) and chloride (200 mg/l). The heavy metals profile that was investigated are Fe, Cu, Zn, Pb, Cd and Cr of which were found above the WHO and FEPA permissible limit, however, on the contact with the adsorbent therefore reduced the metals to the permissible limit. It can be ascertain that ZnO nanoparticle can be used as an effective adsorbent for the treatment of petrochemical effluent